This page hosts the current proposed Open Source Hardware (OSHW) Statement of Principles and Definition v1.0. The statement of principles is a high-level overview of the ideals of open-source hardware. The definition is an attempt to apply those ideals to a standard by which to evaluate licenses for hardware designs.
To endorse the Open Source Hardware Definition 1.0, please add your name (and affiliation) below
Compiled community feedback from previous versions of the Definition can be found here
If you would like to propose changes to the statement of principles or definition, please do so on the work-in-progress draft. And, please edit while signed in, not anonymously.
Please join the conversation about the definition here
Open Source Hardware (OSHW) Statement of Principles 1.0
Open source hardware is hardware whose design is made publicly available so that anyone can study, modify, distribute, make, and sell the design or hardware based on that design. The hardware's source, the design from which it is made, is available in the preferred format for making modifications to it. Ideally, open source hardware uses readily-available components and materials, standard processes, open infrastructure, unrestricted content, and open-source design tools to maximize the ability of individuals to make and use hardware. Open source hardware gives people the freedom to control their technology while sharing knowledge and encouraging commerce through the open exchange of designs.
Open Source Hardware (OSHW) Definition 1.0
OSHW Draft Definition 1.0 is based on the Open Source Definition for Open Source Software and draft OSHW definition 0.5. The definition is derived from the Open Source Definition, which was created by Bruce Perens and the Debian developers as the Debian Free Software Guidelines. Videos and Documentation of the Opening Hardware workshop which kicked off the below definition are available here. Please join the conversation about the definition here
Open Source Hardware (OSHW) is a term for tangible artifacts -- machines, devices, or other physical things -- whose design has been released to the public in such a way that anyone can make, modify, distribute, and use those things. This definition is intended to help provide guidelines for the development and evaluation of licenses for Open Source Hardware.
It is important to note that hardware is different from software in that physical resources must always be committed for the creation of physical goods. Accordingly, persons or companies producing items ("products") under an OSHW license have an obligation not to imply that such products are manufactured, sold, warrantied, or otherwise sanctioned by the original designer and also not to make use of any trademarks owned by the original designer.
The distribution terms of Open Source Hardware must comply with the following criteria:
The hardware must be released with documentation including design files, and must allow modification and distribution of the design files. Where documentation is not furnished with the physical product, there must be a well-publicized means of obtaining this documentation for no more than a reasonable reproduction cost, preferably downloading via the Internet without charge. The documentation must include design files in the preferred format for making changes, for example the native file format of a CAD program. Deliberately obfuscated design files are not allowed. Intermediate forms analogous to compiled computer code -- such as printer-ready copper artwork from a CAD program -- are not allowed as substitutes. The license may require that the design files are provided in fully-documented, open format(s).
The documentation for the hardware must clearly specify what portion of the design, if not all, is being released under the license.
3. Necessary Software
If the licensed design requires software, embedded or otherwise, to operate properly and fulfill its essential functions, then the license may require that one of the following conditions are met:
a) The interfaces are sufficiently documented such that it could reasonably be considered straightforward to write open source software that allows the device to operate properly and fulfill its essential functions. For example, this may include the use of detailed signal timing diagrams or pseudocode to clearly illustrate the interface in operation.
b) The necessary software is released under an OSI-approved open source license.
4. Derived Works
The license shall allow modifications and derived works, and shall allow them to be distributed under the same terms as the license of the original work. The license shall allow for the manufacture, sale, distribution, and use of products created from the design files, the design files themselves, and derivatives therof.
5. Free redistribution
The license shall not restrict any party from selling or giving away the project documentation. The license shall not require a royalty or other fee for such sale. The license shall not require any royalty or fee related to the sale of derived works.
The license may require derived documents, and copyright notices associated with devices, to provide attribution to the licensors when distributing design files, manufactured products, and/or derivatives thereof. The license may require that this information be accessible to the end-user using the device normally, but shall not specify a specific format of display. The license may require derived works to carry a different name or version number from the original design.
7. No Discrimination Against Persons or Groups
The license must not discriminate against any person or group of persons.
8. No Discrimination Against Fields of Endeavor
The license must not restrict anyone from making use of the work (including manufactured hardware) in a specific field of endeavor. For example, it must not restrict the hardware from being used in a business, or from being used in nuclear research.
9. Distribution of License
The rights granted by the license must apply to all to whom the work is redistributed without the need for execution of an additional license by those parties.
10. License Must Not Be Specific to a Product
The rights granted by the license must not depend on the licensed work being part of a particular product. If a portion is extracted from a work and used or distributed within the terms of the license, all parties to whom that work is redistributed should have the same rights as those that are granted for the original work.
11. License Must Not Restrict Other Hardware or Software
The license must not place restrictions on other items that are aggregated with the licensed work but not derivative of it. For example, the license must not insist that all other hardware sold with the licensed item be open source, nor that only open source software be used external to the device.
12. License Must Be Technology-Neutral
No provision of the license may be predicated on any individual technology, specific part or component, material, or style of interface or use thereof.
The signatories of this Open Source Hardware definition recognize that the open source movement represents only one way of sharing information. We encourage and support all forms of openness and collaboration, whether or not they fit this definition.
Licenses and Hardware
In promoting Open Hardware, it is important not to unintentionally deceive designers regarding the extent to which their licenses actually can control their designs. Under U.S. law, and law in many other places, copyright does not apply to electronic designs. Patents do. The result is that an Open Hardware license can in general be used to restrict the plans but probably not the manufactured devices or even restatements of the same design that are not textual copies of the original. The applicable section of copyright law is 17.102(b), which says:
- In no case does copyright protection for an original work of authorship extend to any idea, procedure, process, system, method of operation, concept, principle, or discovery, regardless of the form in which it is described, explained, illustrated, or embodied in such work.
The below translations have been offered by members of the community and should be checked for accuracy and possible language problems.
OSHW Draft Definition 1.0 has been endorsed by the following persons and/or organization as of 2011/05/8.
Please feel free to add (your own names) to this section. Listing your affiliation is optional for personal endorsements, and endorsements are presumed to be personal unless the organization name is listed separately.
Please join the conversation about the definition here
- Adam Mayer, Makerbot Industries
- Andrew Meyer
- Adam Wolf, Wayne and Layne
- Addie Wagenknecht and Stefan Hechenberger Nortd Labs Eyebeam Lasersaur
- Akiba, FreakLabs
- Alexander Ruiz Ingenio Sólido S.A.S
- Alexis Sánchez PingüinoVE
- Alicia Gibb Bug Labs
- Alok Prasad
- Amanda Wozniak, Ninja Networks
- Amon Millner Scratch & MIT, Olin College, and Modkit
- André Menks Multilógica-shop
- Andrew Back Open Source Hardware User Group
- Andrew Plumb, ClothBot Designs
- Andrew Sliwinski OmniCorpDetroit
- Andrew Stone, Toasted Circuits
- Andy Gelme, Connected Community HackerSpace, Melbourne, Australia and Geekscape Pty. Ltd.
- Anil Kumar Pugalia (Pugs' Passion)
- Asim Baig, Tinkeract
- Ayah Bdeir, littleBits.cc/Eyebeam/Creative Commons
- Bastian Bittorf bittorf wireless ))
- Ben Leduc-Mills Craft Technology Lab
- Ben Lipkowitz, SKDB reprap
- Bernard Pratz, hackable:Devices
- Bernt Weber, Splashelec
- Bhagyashri Sharangpani, Bhasha Technologies
- Bill Shaw Inanimate Reason
- Boseji Electronics For Bharat|A.D.H.A.R Labs
- Brandon Stafford, Rascal Micro
- Brett Hagman, Rogue Robotics, Wiring
- Bryan Bishop, SKDB Humanity+
- Cécile Montagne, open-devices
- Carmen Trudell Fluxxlab
- Carson Reynolds University of Tokyo
- Catarina Mota, openMaterials
- Charles Collis, AdCiv.org
- Charles Edward Pax, Makerbot Industries
- Charles Yarnold
- Chris Anderson, 3D Robotics/DIY Drones
- Chris Jefferies, Tinaja Labs
- Christopher Lee, Australian Robotics
- Chris Walker, Netduino Secret Labs
- Christian Siefkes, keimform.de
- Constantin Craciun Harkopen.com - open source hardware community
- Dan Clark GroundZero Labs
- Daniel Garcia Protostack
- Dave Borghuis TkkrLab hackerspace
- Dave Hrynkiw Solarbotics Ltd., HVW Technologies
- David A. Mellis, Arduino
- David Ankers & James Cotton, The OpenPilot Foundation
- David Carrier, Parallax Inc.
- David Cuartielles, Arduino OSHW_Spanish
- David Gascón, Libelium, Cooking-Hacks
- David Lang, OpenROV
- David Reyes Samblás Martínez Tuxbrain
- David Siren Eisner, InMojo
- Diego Spinola Hackeneering
- Dilshan R Jayakody nanoLEAF
- Dumitru Stama dicsEE
- Dustyn Roberts, dustynrobots
- Ed Minchau, Magical Robotics
- Eric Boyd sensebridge
- Eric Michaud i11 Industries
- Eric Thompson Low Voltage Labs
- Federico Lucifredi SUSE Linux
- Frédéric Jourdan, Snootlab
- Frank Piller, rwth-aachen university
- Geoffrey L. Barrows, Centeye, Inc. and Embedded Eye
- George Hadley, NBitWonder
- Graham Bicknell
- Greg Grossmeier, Open Evangelist
- Greg Krsak
- Hélio Pereira
- Helio Ribeiro da Silva Filho
- Hans Scharler ioBridge ThingSpeak
- Hong Phuc Dang FOSSASIA
- J. Simmons Mach 30: Foundation for Space Development
- James Grahame, Reflex Audio MeeBlip
- Jason Veneman, Intelligenate
- Jasmin Skenderi alpha-board Elektronik-Design und Fertigungsservice Berlin
- Jatinderjit Singh, Embisys
- Jean Demartini, DEMTECH - Sophia-Antipolis - France
- Jean-Marc Giacalone, eMAKERshop
- Jeff Karney JK Devices
- Jeff Keyzer MightyOhm Engineering
- Jeff Moe, Aleph Objects, Inc.
- Jeff Saltzman, Jeff's Arduino Blog
- Jim Barkley, The MITRE Corporation
- Jimmie P. Rodgers JimmiePRodgers.com
- Joan Espinoza PingüinoVE
- Joel Murphy Rachel's Electronics Parsons D+T
- John Wilbanks, Creative Commons
- John Lejeune, h:D
- John M. De Cristofaro
- Johnny Russell UltiMachine
- Jon Kuniholm, The Open Prosthetics Project
- Jon Masters www.jonmasters.org
- Jonathan Dahan, Island Labs
- Jonathan Oxer, Freetronics
- Joseph H Althaus
- Joseph Di Carlo
- Josef Průša  RepRap developer
- Josh Boughey The Stribe Project
- Joshua D. Johnson Protobot Industries physical prototyper/inventor
- Juergen Neumann, OHANDA - Open Source Hardware and Design Alliance
- Julien Rouviere, OpenSCB
- Kevin Townsend, www.microBuilder.eu
- Koichi Takagi, Nagoya City University
- Lenore Edman, Evil Mad Science
- Limor Fried, Adafruit Industries
- Louis Montagne, Bearstech
- Lubos Medovarsky, Accelera Networks
- Luigi Carnevale, Droids
- Marcus A. Link Manupool - A Product Development Community
- Mario Behling, MBM
- Mark McComb, hacktronics
- Massimo Banzi Arduino
- Matthew Beckler, Wayne and Layne
- Matthew Slater Community Forge
- Matthieu Quadrini OpenSCB
- Michael Krumpus nootropic design
- Michael McPherson
- Michael Ossmann, Great Scott Gadgets
- Michael Ruppe
- Mike Provenzano, Progunn Industries
- Mitch Altman Cornfield Electronics
- Mitch Patterson(mitpatterson) Mitch's Tech Blog
- Morten I. Larsen
- Nathan Seidle SparkFun Electronics
- Nicholas C Lewis A RepRap Breeding Program
- Nis Sarup
- Patrick Korkuch
- Pavol Rusnak, hackerspace brmlab
- Peter Kirn, Create Digital Music MeeBlip
- Phillip Torrone, MAKE magazine Adafruit Industries
- Pierce Nichols Logos Electromechanical LLC
- Rafael Barmak OVNI Lab
- Raúl Oviedo Ingenieria Electronica
- Raghavan Nagabhirava
- Richard Anderson Fair Use Building and Research Labs
- Robert Fitzsimons Part Fusion Electronics
- Ronen Kadushin Open Design
- Ron K. Jeffries, Jeffries Research
- Roy Mohan Shearer, Openthing
- Ryan Pulkrabek, Collaborative Space Travel and Research Team (CSTART)
- Samuel Sayer, The MITRE Corporation
- Samuel Vale, Holoscópio Tecnologia
- Sascha Meinrath, Open Technology Initiative
- Scot Kornak, BusBoard Prototype Systems Ltd.
- Shannon Morrisey
- Shigeru Kobayashi IAMAS Funnel Gainer
- Stacy L. Devino, Does it Pew?aka childofthehorn
- Sterling Pickens, linuxsociety
- Steve Dickie, ArduinoEducation.com
- Steve Gifford, Chips To Bits
- Steve Hoefer Grathio Labs
- Stewart Dickson Makerspace-Urbana
- Thomas Gokey, artist
- Tom Igoe, Arduino ITP, NYU
- Tully Gehan, Samurai Circuits
- Tuomo Tammenpää, OHANDA - Open Source Hardware and Design Alliance
- Usman Haque, Pachube
- Vlad Trifa, Web of Things ETH Zurich
- Will Pickering, FunGizmos
- William Morris, I Heart Robotics/I Heart Engineering
- Wim Vandeputte, kd85
- Windell Oskay, Evil Mad Science
- Yannick Avelino, Electrolab
- Ramón Martínez, Tenderoo Mobile Payment
- Gregor Gross alpha-board Elektronik-Design und Fertigungsservice Berlin
- Joseph Gray 911 Media Arts Center, Seattle projBox
- Viento Floating City Copenhagen
- Cesar Harada Protei, sailing drones